Mobile Signal Light
Solar - powered rechargeable mobile signal light. The luminaire is composed of 12 300mm - diameter circular luminaire units (one in each direction of red, yellow and green units, a total of 4 directions, 2 phases). It has the advantages of high brightness, ease of use, flexible setting, long continuous working time when there is no sunlight, etc. Considering the actual use, it adopts advanced technologies such as automatic yellow flashing, battery charging and discharging protection, which effectively prolongs the battery service time and life.
Product Composition
1.Luminous unit: the diameter of the luminous surface is 300mm;
2.Solar panel: one piece of 18V/100W polycrystalline silicon cell module.
3.Battery: four 12V/65Ah maintenance - free lead - acid batteries.
4.Light source: Each unit contains 121 high - brightness LEDs. 4 sets of red. yellow and green units. a total of 12 sets.
5.Lampshade: cast aluminum process;
6.Lamp pole: the rod and shell are steel plates. galvanized and sprayed with plastic to prevent corrosion;
7.Control system: Microchip series single - chip microcomputer control. electronic switch using VMOS tube. small pressure drop. high sensitivity. The time of green light. yellow light and red light can be adjusted. and the setting indication adopts a digital tube. which is clear and beautiful. For the sake of power saving. it will automatically turn off if you don't press the button for one minute;
8.Working hours: 24h uninterrupted work. more than 7 consecutive rainy days (different regions/seasons may be different)
Performance parameters
1.Ambient temperature: - 40°C ～ 80°C;
2.Night working mode: "Night working mode" can be set. that is. yellow flash mode. flashing frequency: 1Hz;
3.Rated working voltage: 12V;
4.Battery under - voltage protection: 11V
5.Battery over - voltage protection: 13.5V
6.The protection level is greater than IP53
The Public
Mobile terminal